Beskrivelse
Detaljer
Ved populær efterspørgsel lager vi nu en række ubebyggede nitro-radiostyrede bilsæt til dem, der nyder at bygge modeller så meget som at bruge dem! Glem lego osv. Disse selvbyggede kits giver timers sjov og når de er færdige, er de faktisk sjove at bruge! Til de tiders brug og nydelse får du fra første bygning og derefter kører dem disse sæt er fantastisk værdi for pengene.Vi sælger nogle af disse modeller til skoler, da de er uddannelsesmæssige og en god introduktion til mekanik og teknik.
Der er ikke noget andet produkt på markedet, der giver så fuldstændig alt i boksættet som dette. I modsætning til andre selvbyggede kits på markedet, der kun omfatter det grundlæggende chassis og ingen af elektronikerne osv., omfatter disse kits alt, hvad der er nødvendigt for at færdiggøre og endda de værktøjer, du har brug for til at bygge dem! sh 18 motor, pistol type radioudstyr, fedt, olie mv - alt er der. Bygningen vil tage omkring 8-12 timer i gennemsnit og anbefales i alderen 14 +.
Det vigtigste med et selvbygget sæt er instruktionsmanualen. med disse kits er manualen blevet givet meget opmærksomhed for at sikre en jævn konstruktion. dette er ikke et par sider pamflet ligesom med nogle andre kits, dette er en tyk manual, der blev designet og skrevet i u.k. for at sikre, at intet var tabt i oversættelse på fabrikken. konstruktionen er opdelt i mange faser med hvert tilsvarende scenes dele pakket separat som vist ovenfor. trinene er tydeligt vist ved hjælp af cad 3d billeder med hver enkelt del, der er mærket individuelt. Slutresultatet er condor off road buggy. en yderst dygtig off road model, der har et stærkt legeret chassis, akseldrevet 4wd system, oliefyld chok, for- og bagdifferentialer og forseglet radiobakke.
Condor er drevet af en Taiwan SH-størrelse 18 motor, der racerer modellen til over 40mph. Buggy kan opgraderes med en række performance hop ups tilgængelige fra vores hjemmeside, og du kan endda passe en to gearkasse for at gøre det endnu hurtigere!
ALT DER VAR NØDVENDIGT FOR AT BYGGE INKLUDERET
Selv de værktøjer og olier.
DETALJEREDE TRINVISE INSTRUKTIONER
Manuskript skrevet i Det Forenede Kongerige.
LÆRE OM FORBRÆNDINGSMOTORER OG MEKANIK
Uddannelsesmæssigt og sjovt, der bruges i skolerne som en sjov undervisningsøvelse.
OVER 400 STYKKER I TIMERS SJOV BYGGETID
14 poser med 14 faser af spændende oplevelse.
NYD AT OPBYGGE DET SÅ MEGET SOM AT BRUGE DET
Det er en livstidsoplevelse for børn at samle deres egen nitro model.
2.4GHZ RADIO SEAT
Tillader, at flere modeller bruges i samme område uden forstyrrelse.
HALVVEJS GENNEM BYGNINGEN
Fantastisk måde at holde børn engageret.
KROPSSKAL
Sidste trin skåret kropsskal for at afslutte bygningen.
BYGGE KOMPLET
Buggy er klar til at løbe.
Specifikationer & Funktioner
Yderligere information
Varenummer | A3001 |
---|---|
Fabrikant | Acme-Tech |
Skala | 1:10 |
Samle | Samle Selv Sæt |
Køre | 4WD |
Til Terræn | Off Road |
Radio Udstyr | 2.4 GHz |
Type | Buggy |
Morot | .18 Nitro |
Specifikationer |
|
Funktioner |
|
Nødvendigt til brug |
Optional: This model comes with an AA powered glow starter, however the upgrade of a rechargeable Glow Starter Set is available above in Related Products. |
Q&A
Questions:
There are no product questions yet.
Parts & Upgrades
Reservedele
Opgraderinger
Leverings Oplysninger
LEVERINGSOPLYSNINGER
Leveringsomkostninger og tid vil afhænge af størrelsen af de bestilte varer
RESERVEDELE
De vil tage mellem 2-5 arbejdsdage. Omkostningerne afhænger af antallet af dele og størrelsen.
Germany: €3.70 - €7.40
Spain: €7.40 - €13.30
France: €7.40 - €11.80
Ireland: €7.40 - €8.90
Italy: €7.40 - €13.30
Netherlands: €5.95 - €8.99
Portugal: €7.40 - €10.30
Denmark: 42kr. - 72kr.
Sweden: 52.80kr - 105.60kr
NORMAL STØRRELSE MODELLER
Dette omfatter ikke meget store genstande såsom el-cykler, store scootere og quad Bikes. Levering vil tage 2-5 arbejdsdage.
Germany: €7.40
Spain: €9.99
France: €8.99
Ireland: €7.40
Italy: €9.99
Netherlands: €8.99
Portugal: €9.99
Denmark: 72kr.
Sweden: 105.60kr
MEGET STORE GENSTANDE
Meget store genstande såsom el-cykler, store scootere og quad Bikes. Levering vil tage 2-5 arbejdsdage.
Germany: €49.90
Spain: €49.90
France: €49.90
Ireland: €49.90
Italy: €49.90
Netherlands: €49.90
Portugal: €49.90
Denmark: 499kr.
Sweden: 499kr.
32 Kundeanmeldelser
Fiddly But Fun
Af mark May 24, 2020I bought the self build kit as a joint present for my 13yr, 11yr old sons (and myself) for Christmas. Took us about 3 days, 3 or 4 hours per day off and on to build it together. The boys really enjoyed building it and learning about the differential and how the shocks worked and filled with oil.
Starting the car in December outside was a challenge on account of it being too cold. We found this guide on line which properly explained how the carburetor works and how to set it up https://www.nitrotek.co.uk/blog/2015/12/06/the-definitive-10-step-guide-on-how-to-start-your-nitro-rc-car/ but still struggled. Eventually I found that heating the engine block up with a hair dryer to get it warned up made it easier to get it going and run the engine in.
Once we'd got it going we had to fiddle with a combination of the low idle and throttle adjustment on the controller to prevent it driving off on it's own.
Now in lockdown in spring (bit Warner) it's been great fun getting it going again on a playing fields taking it in turns. It's pretty fast and quite easily copes on a bumpy grassy field bombing around.
All in all if you want a project and are happy to fiddle with it to get it going and are interested in learning about RC cars and how they work then I'd recommend this as a great way to while away many an afternoon with the kids.o
Af Morgan April 16, 2020very good buggy, very fast, much fun making it. a lot of plastic parts.
good for beginners
Af conrad October 26, 2014i got this for my birthday and spent a long weekend building it,the engine was a little hard to start but once it did it was nothing but fun.
Great first time item for newbies.
Af Adam May 07, 2014This is without a doubt a great first time buy for anyone looking to dabble in the world of RC cars. putting it together took around a week and without only a few annoyances where the car nearly met the wall.
Pros:
Great value
good for a project
loads of fun and interaction whilst building it and after
All round a definite buy for first timers like me
Cons:
A lot of the pieces are plastic therefore relatively easy to break when driving it around (I have already had to replace the front suspension with the metal ones as it snapped).
Some extremely fiddly DIY at times where I had to get more than one pair of hands involved to get the job done.
Been running it now for nearly 6 weeks and I found the engine is a bit fiddly to find that sweet spot. I am still playing around with it and it is getting a tad annoying as its not as simple as starting it up, having a 5 - 10 minute fiddle then off you go. If the carburettor isn't set properly then it will either die after a few seconds or the car will want to go before you even get your finger on the accelerator, which brings me onto the carburettor. I am now experiencing problems with the screw holding the air cover in place meaning I have no way of setting the carburettor correctly until I resolve this...which I will.
So in summary; a great buy, just what I wanted (something fiddly, and time consuming with a lot to get out of it), a way to get slightly more mechanically minded, a long term hobby, but one that I would recccomend upgrading certain parts of, i.e plastic suspension to metal etc.
I highly recommend it but if your looking for something a bit more reliable I would go for the already built models.
Don't let the little issues put you off, after all, there are going to be set backs and if it wasn't the way it was then it wouldn't be worth it. You wouldn't discard your car if it suddenly annoyed you for any small or large reason.
NITROTEK SAYS - Thanks for the great review. If you are having to adjust the carb before each use it means that probably one of your screws on the engine or exhaust are loose. Because if there is a loose screw then air starts to get into the engine which messes the settings up. Tighten the loose screw and then no air can get in so the carb settings will stay the same.jolie
Af jojo14op May 07, 2014super très intérésant